Firmware
DOWNLOADS | W150D (V3.0) Firmware V1.0.1_EN
DOWNLOADS | W150D (V3.0) Firmware V1.0.0_EN
DOWNLOADS | W150D (V3.0) Firmware V1.0.0.4(For New Zealand/Australia)
DOWNLOADS | W150D (V3.0) Firmware V1.0.0.3(For New Zealand PPPoA)
DOWNLOADS | W150D (V5.0) Firmware V1.1.0.10_EN
LAN / WAN Connectivity
WAN throughput: 24 Mbps
WAN throughput upstream: 3 Mbps
WAN ports: 1
WAN port(s) type: DSL/ISDN/POTS connector (RJ-11)
LAN ports: 4
LAN ports type: 10/100 Base-TX (RJ-45)
LAN ports auto cross-over: yes
Router
NAT routing: yes
Multihomed: yes
DMZ: yes
Port forwarding: yes
Port triggering: yes
DHCP server: yes
DHCP client: yes
Dynamic DNS client: yes
QoS: yes
UPnP: yes
DSL
DSL compliance: ADSL1 (G.dmt 992.1, G.lite 992.2, G.hs 994.1, DMT T1.413)
ADSL2 (G.992.3, G.lite.bis 992.4)
ADSL2+ (G.992.5)
ADSL2+M (G.992.5 Annex M)
PPPoE client: yes
PPPoA client: yes
Wireless
Maximum Wireless Speed: 150 Mbps
WiFi standards supported: 802.11b (11 Mbps)
802.11g (54 Mbps)
802.11n
Wifi security/authentication: WEP
WPA (TKIP)
WPA2 (AES)
Wireless MAC Address filtering
WiFi modes: Access point
Wireless bridge (PtP)
external antenna(s): 1
ext antenna(s) removable ?: yes
Antenna gain: 5 dBi
WPS (Wi-Fi Protected Setup): yes
Device Management
Default IP address: 192.168.1.1
Default admin username: n/a
Default admin password: n/a
Administration: Web-based (LAN)
Remote configuration (WAN)
Quick Setup Wizard
Firmware upgradeable: yes
Configuration backup/restore: yes
Event log: yes
Diagnostic functions: yes
Thank you for visiting and reading this article page and downloading files for free, don't forget to return to our latest article.
0 Response to "(Direct Link) Tenda Router Firmware Upgrade W150D (V3.0 / V5.0)"
Post a Comment